Skip to main content

You are here

Feed-in Tariffs

Also in this section

Feed-in Tariffs (FITs) is a UK Government scheme designed to encourage uptake of a range of small-scale renewable and low-carbon electricity generation technologies.

Under FITs, you could be paid for the electricity you generate if you install or have installed an eligible system like solar PV, a wind turbine, hydro or micro CHP technology.

The UK Government's Department of Business, Energy and Industrial Strategy (BEIS) makes the policy decisions about the FITs scheme and are the relevant contact for queries about legislation. The energy regulator Ofgem E-Serve administers the scheme.

Certain energy suppliers (also known as FITs licensees) handle FITs scheme applications and will make the FITs payments. The large energy suppliers are required by law to be FITs licensees; smaller suppliers are not required by law to do this but many have opted to offer this service anyway. Visit Ofgem for a list of FITs licensees.

Please note: the information on this page is not an exhaustive list of all the criteria of the Feed-In Tariffs scheme.


Important information – Feed-In Tariffs Scheme closure after 31 March 2019

On 18 December 2018 the Department for Business, Energy and Industrial Strategy (BEIS) announced the Feed-In Tariffs scheme (FITs) will close to new applications after 31 March 2019.

This decision was made following two public consultations; one consulting on scheme closure and the other seeking views on the future of small-scale low carbon electricity generation support.

On 8 January 2019, BEIS has also published an further consultation on a ‘Smart Export Guarantee’, under which government would legislate for suppliers to remunerate small-scale low-carbon generators for the electricity they export to the grid.

If you are interested in installing a renewable electricity system and receiving FITs payment, you will now have limited time to research options, install a system and register for the scheme before the scheme closes.

If factoring FITs payments into the decision to install you should ensure you will meet the scheme’s eligibility criteria before starting work.

Householders installing domestic systems (solar PV and wind under 50kW and all micro CHP systems) that wish to apply to the scheme should:

  • have the system commissioned and an MCS certificate issued on or before 31 March 2019.
  • you would then have until 31 March 2020 to apply to their FIT licensee for accreditation.
  • N.B The number of new installations that can receive support under the FIT scheme each month is capped – known as a deployment cap.
  • The deployment cap will still apply and would need to be sufficient space in the final quarterly deployment cap (Jan – March 2019) to accommodate an installation’s capacity – if not, it would not be eligible for FITs support.


Other points to consider:

  • If you also apply for other funding it is important to consider eligibility criteria. For example to be eligible for the Home Energy Scotland loan you must not start work until you receive a loan offer. Starting work before a loan offer to ensure a FITs application can be made is not an acceptable reason for not meeting this condition of the loan scheme.
  • You may find Ofgem’s Feed-In Tariffs page and Ofgem’s FAQs on scheme closure useful resources.
  • Full details of the consultations and BEIS’ response can be found here:

  • It’s important not to rush into a decision without doing your research.
  • If you have a query about an existing application you can contact Ofgem or your FITs Licensee. Ofgem have a list of FITs Licensees contact details on their site.


How much could I receive through FITs?

If you are eligible to receive FITs payments you will benefit in three ways:

  • Generation tariff: your energy supplier will pay you a set rate for each unit (or kWh) of electricity you generate. Once your system has been registered, the tariff levels are guaranteed for the period of the tariff (up to 20 years) and are index-linked.
  • Export tariff: your energy supplier will pay you a further rate for each unit you export back to the electricity grid, so you can sell any electricity you generate but don't use yourself. At some stage smart meters will be installed to measure what you export, but until then the energy you export is estimated as being 50 per cent (75 per cent for hydro) of the electricity you generate (only systems above 30kWp need to have an export meter fitted, and a domestic system is unlikely to be that big). Similarly, the export tariff is index-linked.
  • Energy bill savings: you will be making savings on your electricity bills because generating electricity to power your appliances means you don’t have to buy as much electricity from your energy supplier. The amount you save will vary depending how much of the electricity you use on site. Learn more about renewable electricity.

What technologies can I claim FIT support for?

Most domestic renewable and low carbon electricity-generating technologies qualify for the scheme, including:

For you to qualify for the FITs scheme, the installer and the products you use must both be certified under the Microgeneration Certification Scheme (MCS), except hydro and anaerobic digestion which have to go through the ROO-FIT process. The tariffs you receive will depend on both the eligibility date and, for solar PV, your property’s Energy Performance Certificate (EPC) rating.

How do I apply for FITs?

There are two routes for application to the FITs scheme.

1. The MCS route for application

The MCS route is for PV or wind installations with a declared net capacity (DNC) of 50kW or less and micro CHP installations with a total installed capacity (TIC) of 2kW or less. This will cover most applications. Make sure that both the product and installers are MCS-certified. You should be issued with an MCS certificate once your installer has registered your installation on the MCS database. 

We recommend that you contact your FIT supplier (also known as the FIT licensee) as soon as possible (ideally before your system is commissioned) to confirm the requirements and make sure you know exactly what information they require from you and when they need to receive it by.

It is particularly important if you are considering installing solar PV as you will be required to provide an Energy Performance Certificate (EPC) for your property, proving that you have achieved a band D or above in order to be eligible for the higher tariff rate.

Once your system is commissioned, tell your chosen FIT licensee that you wish to register for  FITs and send them:

  • a completed application form,
  • the MCS certificate,
  • for solar PV, the EPC that shows your home has an energy efficiency rating band D or better. Note: the EPC will need to be dated before the commissioning date of the system. If the EPC band D or better is dated on or after the commissioning date of your system you will be eligible for the lower rate.

​Your FITs licensee will:

  • cross-reference your installation with the MCS database and undertake other eligibility checks;
  • confirm your eligibility and the date you are eligible for payments from. This will be the later of the following, the date the application for FITs is received by the FITs Licensee or the first day of the quarter the installation qualifies under.
  • add you to the Ofgem Central FIT Register, which records all installations in the FIT scheme. If your application is affected by a cap it will be queued (ordered by the date and time of your MCS certificate date). You will receive the tariff set for the quarter your installation eventually qualifies in).
  • agree with you if and when you will need to provide meter readings and when they will make FIT payments to you – these will form part of your statement of FIT terms.

Being given a place in the queue does not guarantee eligibility for a particular tariff or eligibility for support under FITs as it will depend on the volume of applications ahead of you.

2. The ROO-FIT route to accreditation

The ROO-FIT accreditation process is for all other applications. More guidance on this process can be found on Ofgem's website.

Further information on FITs

MCS transitional installation deadlines

Transitional MCS installations are applications where an application to the scheme was made after 15 January 2016 but the system’s MCS certificate issue date and commissioning date was before 15 January 2016.

In these instances, applications had to be made to the chosen FIT Licensee by 31 March 2016 at the latest. This applied to all MCS technologies under the scheme. 

Eligibility date

The ‘eligibility date’ is the date from when FIT payments can be made and will be the later of the following:

  • The date an application is made to a FIT licensee;

  • The start of the period (normally a quarter) that the installation falls into.

The period (normally a quarter) an installation falls into will depend on its MCS certificate issue date and time; if a cap is met, the application will be placed in a queue for the subsequent tariffs (in the next or a later quarter depending on placement in the queue).

A place in the queue does not guarantee eligibility for a particular tariff or eligibility for support under FITs as it will depend on the volume of applications ahead.

The FITs queuing system

An application’s place in queue will depend on the time and date of the MCS certificate.

Ofgem will publish information about deployment levels and when a cap is reached on their website.

FIT licensees will inform MCS customers if a cap is reached. If your application is put on hold, Ofgem will notify you of this and will let you know once the relevant cap opens and your application is being reviewed.

To have the best chance of securing a higher FITs tariff it is sensible to send your FITs application to your chosen FIT licencee as soon as you can. This will mean you are as high up the queue as possible.

FITs tariffs

Once you are receiving FIT payments, you will receive payments for up to 20 years and the rate you get will change in line with inflation in accordance with the Retail Price Index (RPI).

The table below summarises the latest tariffs available for each technology.

At the start of each calendar quarter Ofgem will publish tariffs on their website. These will reflect any reductions in tariffs as a result of deployment in the previous quarter and, once a year on 1 April, an inflationary (RPI) adjustment when applicable. It is not possible to say what future tariffs will be for certain as they will be subject to whether caps within previous quarters are reached and the annual RPI adjustment.











Generation tariffs for installations with an eligibility date between 1 January and 31 March 2019

Higher rate tariff

Solar PV


3.79 p/kWh


4.03 p/kWh



8.24 p/kWh



8.03 p/kWh


<2kW 14.52 p/kWh

Tariff rates updated - 10 January 2019

*Based on the higher rate tariff, which assumes the property has an EPC level of D or above before the installation. 

Please note that this table contains an indicative tariff based on information published on Ofgem’s website. If you are eligible for FITs the tariff you receive will be confirmed to you by Ofgem or your FIT licensee.  

For solar PV, evidence of a property’s Energy Performance Certificate (EPC) rating is required when applying to the FITs scheme. You will need to submit an EPC band D or better, dated before the commissioning date of your PV system, to be eligible for the higher tariff. If the EPC band D or better is dated after the commissioning date of the system, you will be eligible for the lower rate. Also if the property is of band E or lower, you will qualify for the lower tariff rate.

Export tariff of 5.24 p/kWh for all installations with an eligibility date on or before 31 March 2018. 

For site-specific calculation and bespoke report showing estimates of how much you could earn through FIT for solar PV, try our Solar Energy Calculator; for hydro, wind or micro-CHP, try our Cashback Calculator.

More information

Latest Ofgem tariffs

Read details of the latest and historical export tariff rates in the publications on Ofgem's website

Visit Ofgem

Government information

Read more details on FITs from the Department of Business, Energy and Industrial Strategy (BEIS).

Visit BEIS

Based in Scotland?

Call Home Energy Scotland for free, expert and impartial advice on 0808 808 2282, from Monday to Friday between 8am to 8pm and on Saturdays between 9am to 5pm.

Request a callback